Reboque basculante OZGUL 45 CBM Tipper Semi Trailer 3 axle | NEW

NEW 45 M3 ROCK TYPE TIPPER SEMI TRAILER

Wheel Height : 1350 mm

Total length : 9500 mm

Case internal length top : 8905 mm

Case internal length bottom : 8330 mm

Total width : 3450 mm

Case internal width : 2840 mm

Total height : 3700 mm

Case internal height : 2100 mm

Axles group technical capacity : 48.000 kg

King pin technical capacity : 14.000 kg

Vehicle total technical capacity : 62.000 kg

Empty weight : 14.000 kg

Permissible Payload : 60.000 kg

Chassis Welding : ARC submerged

Upper structure : Robot welding

Chassis

Heavy duty and extra durability designed I beam main chassis; Opting for high tensile steel ST 52.3 A welded by automatic Submerged-Arc processes. Top Flange 20 mm, width 150mm; Middle Flange 10 mm, Height 500mm, Bottom Flange 20 mm, width 150mm. Goose neck area chassis 10 mm, Height 180mm, Bottom Flange 20mm,width 150mm Space between both chassis 1 landing gear area.

Case

Volume: 45 Cbm

Floor plate: HB 450 thickness 8mm

Side walls plate: HB 450 thickness 6 mm

Front wall: HB 450 thickness 6 mm

Read door: HB 450 thickness 6 mm

Luggage front wall: HB 450 thickness 6mm

Tipper body cornerx 8 mm HB450 50x50 cm steel cover for whole length

Shape of tipper

Shape of the tipper body is rock type. Rear door of the dumper will be covered and operating with manual operating system bottom to up side door made with U type profile.

Cylinder(Lift)

Five stages are hard chromed,working pressure,170 bar, maximum working pressure is:190 bar, all cylinder meterials are ST 52 cold drawn big lift code no:GHS 197-5-5550 C .(hidromas brand Turkish) Tipping angle degree is minimum 45 degree. / all tipping kits included, you will mount on your truck pto and pump.

Oil tank

150 lt loading capacity tank

Axles

3 x 16 Ton axles with Mechanical spring suspensions Upper slung type / Drum brakes

Tires

13x13R22.5

Rims

13x9.00x22.5

Brake system

Wabco ABS air brake system acting on all wheels (Adr adapted)

All companents Brand Wabco According to EC regulation,ADR adapted

Brake Chambers

2 axles with 4 units T 30/30 emergency brake chambers

1 axles with 2 units T 30 service brake chambers

Electrical system

2x7 pin sockets - 24V, lights accord to standard in SAE rear stop lamps, side

marker lamps, brake safety warning lamps and signal light fitted at the rear

2 tail & stop combined lamps (red)

2 turn signal combined lamps (orange)

1 license lamp (white)

1 revolving lamp rear

Electrical system all equipment brand is SABA Brands ADR adapted

Landing Gear

Front: Jack feet are telescopic, parallel working, double speed jointed with wide

shoes static 50 tons, dynamic 25 tons capacity (GOS Brand)

King Pin

2 + 3.5 inch king pin detachable from below made by SAE standards 8 bolt type

Accessories

Front top has baggage for tent place.

2 x Mudguards which covers tires belongs to rear axle group metal end part plastic

1 x 60 lt plastic water tank

1 x Wheel chocks and holders

1 x Metal tool box

1 x Spare Wheel carrier with 1 tire

2 x Aluminum side protections

1 x Metal ladder front right

1 x Metal ladder rear right side

1 x Rear bumper square and removable type

2 x 7 Rubber under tipper, On chassis.

Reflective tape and reflector sign at the rear and sides

Painting

Chassis :RAL 7021 Grey , Body: RAL 9016 White.